Description
The EBIS-ENC4-IO16 system is the counter interface of the EBIS IoT product family. In addition to the standard features of the EBIS product series, the EBIS-ENC4-IO16 unit has 3 sin/cos and 1 incremental counter inputs or 4 incremental counter inputs. Furthermore to the sensor data acquisition, the system provides a trigger input (e.g. for footswitch) or one output to control an axis (X3 Option). Further, the digital PLC interface with 8 dig. inputs and 8 dig. outputs enables the communication with a PLC and control of extensive automated processes. Due to the available versions and configuration options, a wide range of different sensors can be used and thus a wide variety of applications can be realized.
Technical Characteristics
General Specifications
| Power supply | |
| Nominal voltage | 24V DC |
| Voltage supply | 18V – 30V DC |
| Connector (X1) | 3-pin. M16 male connector |
| Ethernet | |
| IP-Adresse | 192.168.0.17x (configurable) |
| Connector (X2) | Standard RJ45 connector (optional: IP68) |
| Housing | |
| Aluminium desktop housing | optional: DIN rail adapter |
| Dimensions (mm) | 224 x 150 x 60 |
| Communication interfaces | |
| TCP/IP | EBIS-Protocol |
| .NET library | |
| Web interface | Configuration, Firmware update, etc. |
| Cloud Support | MQTT, Azure, AWS |
| Safety features | |
| Status LEDs | Power supply, network status, error |
| Encryption protocol | TLS |
EBIS-ENC4 Specifications
| General | |
| Connectors (ENC1-ENC4) | 9-pin. M23 circular female connector |
| Power supply | 5 V / 250 mA (regulated) |
| Input (ENC4) | 1 x incremental counter input with A, B, Z signal |
| Differential inputs | TIA/EIA-422-B Standard, TTL |
| Input hysteresis | 35 mV typ. |
| Max. input frequency | 32 MHz |
| “Open Circuit, Short Circuit, and Terminated Fail-Safe design” | |
| ESD | ± 15 kV HBM ANSI/JEDEC JS-001 ± 8 kV IEC61000-4-2 Contact Gap Discharge ±-15 kV IEC61000-4-2 Air Gap Discharge |
| Sin/Cos counter inputs (ENC1-ENC3) | |
| Inputs | 3 x sin/cos counter intputs with A, B, Z signal |
| Differential inputs | 10 mVSS – 1 VSS (9 prog. gain) 11µASS |
| Input hysteresis | 5,625° – 9° (depends on interpolation) |
| Interpolation | 1 – 16 |
| Max. input frequency | 200 kHz – 3,2 MHz (depends on interpolation) |
| ESD | 2 kV HBM |
| Incremental inputs (ENC1-ENC3) | |
| Inputs (ENC1-ENC4) | 3 x incremental counter input with A, B, Z signal |
| Differential inputs | TIA/EIA-422-B Standard, TTL |
| Input hysteresis | 35 mV typ. |
| Max. input frequency | 32 MHz |
| “Open Circuit, Short Circuit, and Terminated Fail-Safe design” | |
| ESD | ± 15 kV HBM ANSI/JEDEC JS-001 ± 8 kV IEC61000-4-2 Contact Gap Discharge ± 15 kV IEC61000-4-2 Air Gap Discharge |
| Digital Inputs/Outputs | |
| Number of inputs | 8 |
| Galvanic isolation | 500 VAC |
| Nominal voltage (VSUPPLY) | 24 VDC |
| Power supply | 11 V – 35 V |
| ESD | 2,5 kV HBM JESD22-A114-B 1,5 kV CDM ESD STM5.3.1-1999 |
| Informations: Digital interface IEC61131-2 Type 1, PLC interface, Status LEDs, external power supply needed (VSUPPLY and GND) | |
| Number of outputs | 8 |
| Typ | 0,625 A High-Side Switch |
| Galvanic isolation | 500 VAC |
| Nominal voltage (VSUPPLY) | 24 VDC |
| Power supply | 11 V – 35 V |
| ESD | 2 kV HBM JESD22-A114-B 1 kV CDM ESD STM5.3.1-1999 |
| Informations: Protected against short to VSUPPLY /overload/overvoltage, PLC interface, for all types of resistive, inductive and capacitive loads, Status LEDs, external power supply needed (VSUPPLY and GND) |
Specification depends on version
Versions
| Type | Description | Oder number |
| EBIS-ENC4-IO16(INC) | – ENC1-ENC4 incremental – 8 x dig. Input – 8 x dig. Output – X3: Trigger-Input for e.g. footswitch | 710 |
| EBIS-ENC4-IO16(SIN/COS) | – ENC1-ENC3 sin/cos, ENC4 incremental – 8 x dig. Input – 8 x dig. Output – X3: Trigger-Input for e.g. footswitch | 711 |
| EBIS-ENC4-IO16(INC/AXIS) | – ENC1-ENC4 incremental – 8 x dig. Input – 8 x dig. Output – X3: Output for one axis with external driver | 712 |
| EBIS-ENC4-IO16(SIN/COS/AXIS) | – ENC1-ENC3 sin/cos, ENC4 incremental – 8 x dig. Input – 8 x dig. Output – X3: Output for one axis with external driver | 713 |
| EBIS-ENC4-IO16(INC/AXIS-P) | – ENC1-ENC4 incremental – X3: Output for one axis with internal driver (up to 3A) | 714 |
| EBIS-ENC4-IO16(SIN/COS/AXIS-P) | – ENC1-ENC3 sin/cos, ENC4 incremental – X3: Output for one axis with internal driver (up to 3A) | 715 |
Applications
- Automotive industry
- Machine tool industry
- Medical production measurement
- Optical industry
- Control technology
- Robotics